Keep your firearm in best condition


gunrefinish.com keyword stats



Most current MSN search phrases:

brownells sheridan air rifle parts

Hardwood Floor Refinishing - Do It Yourself Tips

If you're lucky enough to find hardwoodof old nails in the wood, remove them first.
floors hiding under your tired carpeting, youThe remnant of a nail can tear up sandpaper,
might feel like covering the wood back up.damage a sanding pad, and do serious damage
That's understandable because refinishing theto the palm of your hand, so check carefully
floors yourself seems like an impossibleto make sure all remnants of tacks and nails
task.Hardwood floors were a common feature inare gone before you begin sanding. Fill all
houses until the 1960s. Before that, havingnail holes with a quality wood filler,
wall-to-wall carpet was considered a luxurymatching the color as closely as you can, and
upgrade. From the 1970s on, most homes hadlet it dry. Then you're ready to begin
wall-to-wall carpet in nearly every room.sanding the floor with 220-grit sandpaper,
However, tastes change, and over the lastwhether by hand or with a sander. When you're
couple decades, hardwood floors have oncedone sanding, wipe the entire floor with a
again become fashionable and desirable.damp cloth to remove as much sanding dust as
Oftentimes, when I'm talking with someonepossible. Damp cloths work better than vacuum
about fixing houses, they ask if refinishingcleaners. Let the floor dry, and then wipe it
hardwood floors is something they can doagain with a tack rag, which is a cloth
themselves. Unless the person has a physicalimpregnated with resin to pick up fine dust
reason why they can't do it, I generally sayparticles. Again, your local hardware store
yes. However, I also remind them that redoingwill have what you need.After the floor is as
hardwood floors takes a great deal of time,clean as you can get it, apply three coats of
sweat, and elbow grease. As a general rule,polyurethane with a paint pad, allowing each
floors of fifty square feet or less can becoat to dry thoroughly, lightly sanding with
sanded by hand, but for any floor larger than220-grit paper, and wiping the floor with a
that, rent or buy a small orbital sander.damp cloth and a tack rag between coats. If
Everything necessary for doing it yourselfyou prefer an old-fashioned finish, you can
will be available at your local hardwareuse a 50/50 mixture of linseed oil and
store. You can buy a pretty good electricmineral spirits and then wax the floors with
sander nowadays for less than $100, which canbeeswax or paste wax. Take caution with the
be a good investment, especially if you'rechemical mixture and the rags because they
planning to work on your home on a regularcan catch on fire. You can refinish hardwood
basis.The first layer to be removed is oftenfloors yourself. It just takes time and
a thick wax coating, followed by a coat ofeffort--and a good set of kneepads wouldn't
either polyurethane or varnish. A heavy dutyhurt, either! Once you finish, you'll have a
commercial wax stripper can remove the wax,gorgeous floor to be proud of and ready for
and then a lacquer thinner or acetone can bethat next "do it yourself" project--perhaps
wiped on to prepare the wood for the nextthe next room with hardwood floors.
step. If there are any carpet tacks or pieces



1 A B C D 62 63 64 65 66 67 68 69 70 71 72 74 75 76 77 78 79 80 82 83 84 85 86 87 88 89 90 91 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110