| EEZ0X since 1984 has proven to be a solvent, | | | | parkerized surface and the bolt. A drop of water |
| lubricant, cleaner, and protector of both the metal on | | | | stood on the surface like a drop of water in oil. |
| firearms but their stocks as well. Factory finishes on | | | | Cleaning the bore of the powder and copper fowling |
| wooden stocks will be preserved and enhanced by | | | | required the old faithful solvent most of us have |
| the use of EEZOX. | | | | used for years. Once cleaned finally with the |
| My personal firearms have been cared for exclusively | | | | carburetor cleaner also, I applied EEZOX with a swab |
| by EEZOX since my meeting Mr. Nasca at the Dallas, | | | | and then finished with a patch to remove the excess. |
| Texas Shot Show in the late 80's. The hype was so | | | | Due to knee surgery that weapon sat in my garage |
| good I purchased a small can. It sat in my gun room | | | | 6 months. When removed I saw not any rust, just |
| several years until I ran out of my old faithful cleaning | | | | some dust from a hot dry summer. That wiped |
| solvents and in desperation found it behind the bench. | | | | away easily and did not become gummy sticking to |
| Shooting match requires the cleaning to be drudgery. | | | | all moving parts. |
| The instructions required the removal of all the other | | | | The real surprise was the cleaning after shooting the |
| lubricants and solvents prior to applying EEZOX. This | | | | next match. A nylon brush and several dry patches |
| cleaning is against everything I had been taught. I did | | | | followed by a patch lightly saturated by EEZOX and |
| it anyway to a Garand that was my High-Power | | | | nothing else came from the barrel. For kicks, a lightly |
| weapon. A Spray can of carburetor cleaner removed | | | | oiled patch was clean as when it was inserted. A dry |
| all past protection and left a rifle vulnerable to | | | | patch to remove the oil and she was clean and ready |
| everything. Then a coat of EEZOX liberally applied | | | | for the next shooting |
| was slow to dry. Of course, my past association with | | | | EEZOX eliminates missed shots on a cold hunt |
| petroleum products required this if the firearm was | | | | because the lubricant froze. EEZOX is a functioning |
| to be neglected in a cabinet for any length of time, | | | | lubricant from 450 F to -95 F. |
| oil it liberally. Over the years I had lost the | | | | Once you have your gun thoroughly cleaned with |
| instructions that weren't on the can. In disgust, while | | | | EEZOX, a quick bore cleaning and wipe down after |
| still disassembled, most of the heavy coating was | | | | each time you fire will suffice. You will find that your |
| wiped away. It then dried rather quickly. To my | | | | actions will be much smoother and lead buildup gets |
| surprise, the Garand had a different sheen to the | | | | less each time you use EEXOX. |